Aluminum Conductor Steel Reinforced Production Process Requirements

 

Aluminum conductor steel reinforced has good electrical conductivity of aluminum and steel superior strength, and therefore more temperature performance, installation without too much limitation, the conditions of the construction is very simple, maintenance is very convenient, especially suitable for large span wiring needs, its mechanical strength allows for a great tension to tension. In order to ensure reliable performance and quality, the selection of materials and processing technology of the steel core aluminum stranded wire shall meet certain standards.

The steel core stranded with aluminum wire should be galvanized, galvanized to protect the steel core from being oxidized and attached, and will not stick to the outer aluminum wire, resulting in the transmission of current. Steel and aluminum should be staggered and twisted. The state of stranding should be tight and uniform, to ensure that even if the cut will not spread their own. Cable laying installation in the middle is not allowed to have a connector, and steel core aluminum wire production and processing, steel core is not allowed to connect in the middle there. The aluminum line under certain conditions, the length is not enough to be connected, the phase can be welded, but the solder joints should be smooth, polished smooth and annealed.

Introduction of our company

Gongyi Shengzhou Metal Products Co., Ltd. is a professional China Wire and Cable Manufacturers, mainly supply YC Rubber Sheathed Cable,YH Rubber Cable,RVV Cable,YJV Cable,Aluminium Conductor Steel Reinforced(ACSR),Aerial Insulated Cable,ABC Cable,House Electric Wire, etc. series of wire and cable products, sincerely welcome everyone to visit.