Cause of the Power Cable Fever

1. The cable conductor resistance does not meet the requirements, resulting in cable in the operation of the heat generated.

2. The cable selection type improper, resulting in the use of the cable conductor cross-section is too small, the operation of the overload phenomenon, prolonged use, the cable heat and cooling imbalance caused by fever.

3. The cable is arranged when the installation is too dense, poor ventilation and cooling effect, or cable close to other heat sources too close to the normal cooling of the cable, may also cause the cable in the operation of the heat generated.

4. The joint manufacturing technology is not good, crimping is not close, resulting in connector contact resistance is too large, will cause the cable to generate heat.

5. The cable insulation performance is not good, resulting in smaller insulation resistance, the operation will also produce heat phenomenon.

6. Armored cable local sheath damage, after the water on the insulation performance caused by slow damage, resulting in a gradual reduction in insulation resistance, will also cause the cable to produce heat in the phenomenon.

Introduction of our company

Gongyi Shengzhou Metal Products Co., Ltd. is a professional China Wire and Cable Manufacturers, mainly supply YC Rubber Sheathed Cable,YH Rubber Cable,RVV Cable,YJV Cable,Aluminium Conductor Steel Reinforced(ACSR),Aerial Insulated Cable,ABC Cable,House Electric Wire, etc. series of wire and cable products, sincerely welcome everyone to visit.