The Main Reason Affecting the Quality of ACSR

Stranded conductor technology

1.Single line break:

The main reason:

1).Single-line online disk wound loose, single-line online bit too tight;

2). Threading due to friction generated groove inlay; single knot, or put the brake disc tight.

The measures taken

1). Check whether there is a single line cable is not flat or there is pressure line phenomenon, should be drawn in the drawing process should pay attention to receive the cable reel tidy;

2). Timely replacement of seriously worn Thread Pipe;

3).Check the reel top rotation is flexible, to ensure that bearings are well lubricated; Check the reel tension settings are uniform, according to the actual situation to adjust the size of tension.

2.Single-wire arches,loose,snake-shaped bending;

The main reasons are as follows: unreasonable selection of nodal diameter ratio; Misalignment and uneven distribution of each single line position on the twisted cage splitter; too large pore diameter of die pressing; too large tension of individual single wire.

Introduction of our company

Gongyi Shengzhou Metal Products Co., Ltd. is a professional China Wire and Cable Manufacturers, mainly supply YC Rubber Sheathed Cable,YH Rubber Cable,RVV Cable,YJV Cable,Aluminium Conductor Steel Reinforced(ACSR),Aerial Insulated Cable,ABC Cable,House Electric Wire, etc. series of wire and cable products, sincerely welcome everyone to visit.